|When the temperature of RESSAR E cigs PCB is higher than 75 ℃, the white LED indicator will slowly flashing in 15 times and then stop outputting RESSAR electronic cigarettes the voltage.
|Releasing the button RESSAR E cigs for 2 seconds later, the white LED indicator light will fast flashing for 5 seconds.|
|Releasing the button for 2 seconds later, the white LED indicator RESSAR E cigswill gradually light and off RESSAR electronic cigarettes for 4 times.|
|Releasing the button 2 seconds later, the white LED indicator will fast flashing in 4 times. With using the resistance of 1.0ohm of atomizer for this battery capacity, taking one puff is for 3 seconds and it will enter into low voltage protection when the vaping is around 25 puffs RESSAR electronic cigarettes.|
|Fast pressing the battery button 5 times in 2 seconds sequentially then the white LED indicator will fast flashing in 3 times showing the e-cigarette has been locked for not vaping. Then, fast pressing the battery button 5 times in 2 seconds sequentially, the white LED indicator will fast flashing in 3 times showing the e-cigarette has been unlocked for vaping.|
|a. Connecting the micro USB plug to be charging and the red LED indicator will stay bright. It will be green LED indicator all the time when it is full-charge.
b. It is supported pass through vaping.
b. Over charging protectionc. RESSAR electronic cigarettes Over -current protection
d. RESSAR electronic cigarettes Short circuit protection.
|RESSAR E cigs <=30uA|
|RESSAR E cigs 1500mAh|